Support

For instant support please contact us on 01202 021560 or 07981 645783 and we will be happy to assist you. You can download our remote support app below and a technician will assist you.

Download Our Secure Fast Remote Support Tool

gh
Contact Info
164A Alder Road Poole, BH12 4AX
Poole, BH12 4AX
enquiries@allsolutions.ltd.uk
01202 021560
07981 645783
g

Products

Search our products

Arctic Freezer 7 X CO Compact Heatsink & Fan, Intel & AMD Sockets, Continuous Operation, Dual Ball Bearing, 6 Year Warranty

£17.99

5 in stock

Quick info
SKU: HEATARCFR7XCO Category: Tag:

Description

Compact Multi-Compatible CPU Cooler for Continuous Operation

  • Compatible with Intel® & AMD® sockets
  • Pre-applied MX-2 thermal paste
  • Extra long life span thanks to dual ball bearing and low motor temperature
  • Lower power consumption and less vibration with new motor technology
  • Offset heat pipes ensure optimal heat dissipation
 
The ARCTIC Freezer 7 X CO is a compact CPU cooler with one 92 mm fan. It is multi-compatible with common Intel® and AMD® sockets. Due to its dual ball bearing it is optimised for Continuous Operation. The Freezer 7 X CO benefits from an improved heatsink design and a reworked heat pipe layout. In conjunction with the fan, which is optimised for high static pressure, ARCTIC was able to significantly improve the Freezer 7 X CO cooling performance.

 

Compatible with Intel & AMD Sockets
The Freezer 7 X CO is compatible with all current desktop sockets from Intel and AMD. By using the mounting frame, simple installation is possible without a need to remove the mainboard.

Pre-applied MX-2 Thermal Paste
Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly.

 

Longer Lifespan thanks to its Low Motor Temperature
The Freezer 7 X CO uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 °C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer 7 X CO.

Offset Heat Pipes enable Optimal Heat Dissipation
The direct touch heat pipes attached to the Freezer 7 X CO and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.
 
 
10 % More Cooling Capacity with Freezer 7 X CO
The ARCTIC Freezer 7 X CO sets new standards in cooling. Compared to its predecessor, a performance increase of almost 10 % could be tested. The thermal resistance stands for the absolute performance of a CPU cooler by indicating the temperature increase per unit of performance. It also represents the cooling performance independent of the processor and is the more accurate alternative to a TDP specification.

More Efficienct and Whisper Quiet
In addition to operating more quietly, even at maximum speed, the Freezer 7 X CO built-in fan motor is also much more efficient. The power consumption was reduced from 0.25 A to 0.07 A, which corresponds to an effective savings of 72 % in power consumption. ARCTIC engineers were also able to reduce the volume by 40 %, allowing the Freezer 7 X CO to run at a whisper-quiet 0.3 sone when at maximum speed.

 

P-fan for Increased Performance
Inspired by the P-series, the Freezer 7 X CO fan benefits from all of the advantages of P-fans:
• High static pressure for increased cooling performance
• Broad RPM range
• Lower power consumption
• Less vibration
• PWM for synchronous fan contro

Double Ball Bearing Constructed for Continuous Operation
The premium quality dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential.
 
 
Offset Heat Pipes enable Optimal Heat Dissipation
The Freezer 7 X CO uses direct-touch heatpipes. This ensures that the heat to be dissipated is transferred directly to the heatpipes without an additional material layer, and transported into the heatsink via the pipes.

 

 

  • Type: Heatsink and Fan
  • AMD/Intel: Combo
  • Compatibility: "Intel:
    1200, 1151, 1150, 1155, 1156, 775

    AMD:
    AM4 , AM3(+), FM2(+), FM1"
  • Fan Connector(s): 4-pin
  • #Hide#LED Lighting: No
  • Colour: Black
  • Weight: 425g
  • Fan Dimensions: 92mm
  • Dimensions: 74.3 (L) x 110.5 (W) x 132.5 (H) mm
  • Fan Controller: PWM
  • Rotation Speed: 300 - 2000 RPM
  • Fan Bearing: Dual Ball Bearing
  • #Hide#775 Socket: Supports Socket 775
  • Noise level: 0.3 Sone
  • Power: 0.07 A/12 V
  • Additional Features: See Overview
  • Package Type: Retail
  • Package Weight: 0.5160 kg
  • Warranty: 6 Years
  • #Hide#115x Sockets: Supports Sockets 115x
  • #Hide#1200 Socket: Supports Socket 1200
  • #Hide# AM4 Socket: Supports Socket AM4
  • #Hide# AM3(+) Socket: Supports Socket AM3(+)
  • #Hide# FM2(+) Socket: Supports Socket FM2(+)